Table of Contents
Advertisement
pdq2_QuickStart.book Page 2 Friday, July 28, 2000 6:37 PM
What to do first
Installing and charging the battery
The battery in your new pdQ
partially charged. Before first use, install the
battery and charge it completely.
1. Turn the phone over. Use the stylus or
your finger to open the cover of the battery
compartment on the back of the phone.
2. Lift off the battery door.
3. Slide the battery into the compartment
with the QUALCOMM label facing you.
The end of the battery with four
copper-colored rectangular depressions
goes toward the top of the phone.
4. Apply gentle pressure until the battery snaps into place.
5. Replace the battery cover.
6. Plug the small round end of the power cord into the round port on the
base of the phone. Plug the other end into a power outlet.
The message "Phone is charging" appears on the screen. If the battery
is completely drained, it may take 6–8 hours to charge completely.
DRAFT
2
2
is delivered
2
pdQ
User's Guide
Advertisement
Table of Contents
