Table of Contents
Advertisement
Other connections
Pin No. Assignment
1
Audio R OUT
2
Audio R IN
3
Audio L OUT
4
GND (audio)
5
GND (video)
6
Audio L IN
7
B OUT
8
Status
9
GND (video)
10
No connection
11
G OUT
Recording mode
The Recording mode allows you to make
surround-compatible analog recordings from
the AV CONNECTOR output.
multichannel sources will be downmixed to
stereo for improved playback with systems that
can provide matrix-decoding (like Dolby Pro
Logic).
1
Press SOUND .
Note
1 • When Recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and
use a prohibited function while Recording mode is on.
• The Recording mode switches off if you change the input function (DVD/CD, TUNER, etc.) or switch the power off.
2 An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital
Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVI
so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.1. Depending on
the component you have connected, using a DVI connection may result in unreliable signal transfers.
• When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match
the new component (see Video Output settings on page 26 to do this).
Pin No. Assignment
12
No connection
13
GND (video)
14
GND (video)
15
R or C OUT
16
BLANK OUT
17
GND (video)
18
GND (video)
19
Video or Y OUT
20
No connection
21
GND (video)
1
Dolby
2
Use
to select REC MODE then press
ENTER .
3
Use
to select MODE ON or MODE
OFF then press ENTER to confirm.
• MODE ON – Multichannel sources are
downmixed to stereo for recording (the
same downmix is heard through the front
speakers and the subwoofer).
• MODE OFF – For regular multichannel
playback through your speaker system
(only the front left and right channels are
output from the AV CONNECTOR output).
Connecting using HDMI
U.K. model only
If you have a HDMI or DVI (with HDCP)
equipped monitor or display, you can connect
it to this player using a commercially available
HDMI cable for high quality digital video.
See About HDMI below for more about the
HDMI connection.
•
Use an HDMI cable to connect the HDMI
OUT interconnect on this player to an HDMI
interconnect on a HDMI-compatible monitor.
09
2
HDMI) to do
33
En
Hide quick links:
Advertisement
Table of Contents
