Other Connections; Connecting External Antennas; Connecting Auxiliary Audio Components; Connecting The S-Video Output - Pioneer DCS-353 Operating Instructions Manual

Other connections

Chapter 9
Other connections

Connecting external antennas

For an external AM antenna, use 5 m to 6 m of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Outdoor antenna
Indoor
antenna
(vinyl-coated
wire)
5 m to 6 m
For an external FM antenna, use a PAL
connector to hook up an external FM antenna.
Connecting auxiliary audio
components
Using the stereo analog inputs, you can
connect an external component such as a tape
deck or MD player for playback through this
system.
Tape deck, etc.
AUDIO

OUTPUT

LINE 1
LINE 1
AV CONNECTOR
VIDEO OUT VIDEO OUT
XV-DV353/360
AM LOOP
PAL connector
LINE 2
FRONT R L CENTER
L
R
SUB
R L
SURROUND WOOFER
AUDIO IN
SPEAKERS
• Connect the AUDIO IN jacks to the analog
outputs of an external playback component.
Connect using RCA pin-plug stereo cables.
• XV-DV353/360 model – These jacks are
labeled LINE 2 on the rear panel.
• XV-DV151/252 model – These jacks are
labeled LINE on the rear panel.

Connecting the S-video output

Australian model only
If your TV has an S-video input, you can use this
instead of the standard video output for a
better quality picture.
• Use an S-video cable to connect the S-
VIDEO OUT to an S-video input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
TV
C /
R
P
R
COMPONENT
VIDEO
C /
B
VIDEO P
B
S-VIDEO Y
VIDEO OUT
XV-DV151/252
09
S-VIDEO
INPUT
FRONT
LINE
L
R
SURROUND
AUDIO IN
31
En