JVC KD-A305J Service Manual page 20

4.4 ERROR CODE
4.4.1 Mechanical Error Detail Codes
Condition
Disc Loading Error
(1) B1 Time Out
(2) B2 Time Out
(3) C1 Time Out
Eject Error
(1) B1 Time Out
(2) C2 Time Out
(3) B2 Time Out
(4) D0 Panel Close
Forced Eject Error
(1) E1 Error
(2) E2 Error
(3) E3 Error
(4) E4 Error
(5) E5 Error
(6) E6 Error
(7) E7 Error
(8) E8 Error
(9) Error
Loading Waiting Error
(1) SW1=H or NO DISC
detection before Loading
Motor activation during
Disc is waiting at thewaiting location.
(2) SW2=L before Loading
Motor activation during
Disc is waiting at thewaiting location.
4.4.2 CD changer mechanism error code
Error contents
Tray eject error
1.TRAYINSW time over
(TRAYINSW:LTRAYOUTSW:H)
2.TRAYOUTSW time over
(TRAYINSW:HTRAYOUTSW:H)
3.TRAYINSW time over
(TRAYINSW:LTRAYOUTSW:L)
4.MAGIN SW:L→H
Tray return error
1.TRAYOUTSW time over
(TRAYINSW:HTRAYOUTSW:L)
2.TRAYINSW time over
(TRAYINSW:HTRAYOUTSW:H)
3.TRAYIN/OUTSW time over
(TRAYINSW:LTRAYOUTSW:L)
4.MAGIN SW:L→H
1-20 (No.MA429<Rev.002>)
After detecting SW1=L, it does not become SW2=L
After detecting SW2=H, it does not become SW2=L
After detecting SW2=L, it does not become SW2=H
After detecting SW2=H, it does not become SW2=L
After detecting SW2=L, it does not become SW2=H
After detecting SW1=L, it does not become SW2=L
immediately after RESET and so on.
Disc can not be ejected due to closed panel.
SW1=H, SW2=L detected from NO DISC
Detected SW1=L after RESET and then detected SW1=H
Detected SW1=H after RESET
Detected SW1=H after SW1=L
Detected SW1=H after SW2=H→L
Time Out for Loading after RESET
Detected SW1=H after SW2=H→L→H
Eject Key input while the procedure is not completed after
Forced Eject execution
Eject Key input during Disc is on the way and not completed
Disc is removed or NO DISC detection condition
Disc is inserted
Tray motor time over
Tray motor does not operate.
Tray stops.
TRAYINSW NG etc.
Magazine is ejected while Tray is being ejected.
Tray motor time over
Tray motor does not operate.
Tray stops.
TRAYOUTSW NG etc.
Magazine is ejected while Tray is being returned.
Details
Details
Error Code Detail Code
09 0011
09 0012
09 0013
01 0021
01 0022
01 0023
01 0024
01 0041
01 0042
01 0043
01 0044
01 0045
01 0046
01 0047
01 0048
01 0049
09 0031
09 0032
Error code Detail code
03 0011
03 0012
03 0013
03 0014
03 0016
03 0017
03 0018
03 0019