JVC KD-A305J Service Manual page 19

4.3 TUNER SERVICE MODE
Key operation (FM, AM and DAB mode)
Enter service mode: [SEL]
Exit service mode: press [ENTER] (SEL) key.
Go to next item: press [DISP] key
Back to previous item: press [BACK] key
VER=#***
########
TINJ= ##
SPI=####
PI =####
PTY=##
TP=#TA=*
MS=#DI=*
AF=####
LEV= ##H
U&W= ##H
IFC= ##H
IFBW= #
RFAGC=##
IFAGC=##
##**
########
#####
[MENU] (3 sec)
MICON version display
# indicates destination: J=USA, U=OTHERS (eg. ASIA), R=EUROPE, E=EASTERN EUROPE
*** indicates version No.
Tuner device and version identification display
Display :TOM V1 for TOMIC V1 tuner.
Display :TOM V2 for TOMIC V2 tuner.
Display :ATOM V2 for ATOMIC V2 tuner.
Display: ATOM V3 for ATOMIC V3 tuner.
Tuner injection indicator
"##" indicates current tuner injection.
FOR DAB ONLY
To link SID display that DAB receives and FM station (Search PI), the reception situation of DA
displayed.
"####" indicates SID code.
FOR RDS ONLY
PI display of receiving station, "####" indicates PI code.
PTY display of receiving station (00~29), "##" indicates PTY code.
TP, TA display of receiving station
"#" indicates TP ON/OFF: 1=ON; 0=OFF;
"*" indicates TA ON/OFF: 1=ON; 0=OFF.
M/S, DI display of receiving station
"#" indicates M/S ON/OFF: 1=ON; 0=OFF;
"*" indicates DI ON/OFF: 1=ON; 0=OFF.
Display the contents of AF memory (by scrolling) "####" indicate AF frequencies.
Fieldstrength indicator.
Adjacent and Multipath noise level indicator.
IF COUNTER result indicator.
FM IF filter bandwidth indicator.
FM RF AGC resulting attenuation.
FM IF AGC resulting attenuation.
CLOCK display of receiving station (Original DISP key operation)
FOR RDS ONLY
PS NAME display of receiving station (Original DISP key operation)
FREQUENCY display of receiving station (Original DISP key operation)
(No.MA429<Rev.002>)1-19