Honeywell GasAlert Max XT II User Manual page 16

Hazardous gas detection system
Table of Contents

Advertisement

GasAlertMaxXT II
User Manual
• Use only BW approved batteries for the GasAlertMaxXT II detector. Refer to
• Charge the detector before first-time use. BW recommends the detector be charged after every workday.
• Charge the GasAlertMaxXT II using the recommended charging adapter only. Do not use any other charging adapter.
Failure to adhere to this precaution can lead to fire and/or explosion. Read and adhere to all instructions in the
charger operator's manual. Failure to do so can result in fire, electrical shock, personal injury, and/or property
damage.
• Extended exposure of the GasAlertMaxXT II to certain concentrations of combustible gases and air may stress a
detector element, which can seriously affect its performance. If an alarm occurs due to high concentration of
combustible gases, recalibration should be performed, or if needed, the sensor replaced.
• Do not test the combustible sensor's response with a butane cigarette lighter; doing so will damage the sensor.
• Do not expose the detector to electrical shock or severe continuous mechanical shock.
• Do not immerse the detector in liquids.
• The pump (XT-RPUMP-K1) is certified for use with the GasAlertMaxXT II detector only.
• Do not attempt to disassemble, adjust, or service the detector unless instructions for that procedure are provided in
the technical reference guide and/or that part is listed as a replacement part. Use only BW Technologies by Honeywell
Replacement Parts and
• The detector warranty will be voided if customer, personnel, or third parties damage the detector during repair
attempts. Non-BW Technologies by Honeywell repair/service attempts void this warranty.
• Warning: The lithium battery (MX-BAT01) may present a risk of fire or chemical burn hazard if misused. Do not
disassemble, heat above 212°F (100°C), or incinerate.
• Do not use any other lithium batteries with the GasAlertMaxXT II detector. Use of any other cell can cause fire and/or
explosion. To order and replace the MX-BAT01 battery, refer to
4
aCautions
Accessories.
Replacement Parts and
Replacement Parts and Accessories.
Accessories.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents