Self-Test - Honeywell GasAlert Max XT II User Manual

Next, the LOW and HIGH alarm setpoints display for all
of the enabled sensors.

Self-Test

7. The detector then performs a self-test to ensure it is
operating correctly. The following screen displays during
the test.
Successful Self-Test: If the self-test is successful, the following screen
displays.
Unsuccessful Self-Test
Lockout on Self-Test Error Option Enabled: If this option is enabled
and a sensor fails, the following screens display before the detector
deactivates.
If Lockout on Self-Test Error is enabled, the sensor
must be replaced to activate and operate the detector.
Refer to Replacing a Sensor or Sensor
GasAlertMaxXT II
Startup Tests
Filter.
15