Table of Contents
Advertisement
6.0
Troubleshooting
SYMPTOM
The yellow LED flashes and the actuator
won't operate.
The PB-16 won't stay on the switchgear
door.
7.0
Specifications
Voltage
Magnet
Projected Life
Carrying case
Weight
SOLUTION
The batteries in the PB-16 are low and
must be replaced
12VDC, (8) AA Alkaline Batteries (located in the hand-held
controller)
400lbs/181kg magnet strength, 20lbs/9kg sheer load.
10,000+ operations
Manufactured by Pelican with the following features:
Two Press & Pull Latches
Double-layered, Soft-grip Handle
Two Padlockable Hasps
Vortex® Valve
Flush Powerful Hinges
Lightweight Strong HPX® Resin
Watertight
Meets airline regulations for carry-on luggage
Exterior Dimensions 16.20" x 12.70" x 6.60" (41.1 x 32.2 x 16.8cm)
PB-16 Actuator – 2.7lbs / 1.22kg
Complete Kit with carrying case – 11lbs / 5.0kg
PB16 Operating Manual
Magnet is not set to ON position
Magnet is not clean
Magnet mounting surface is not
clean or clear of obstructions
The door you are mounting it to is
not ferrous
The door you are mounting it to is
made from metal too thin for the
magnet to firmly hold.
© MarTek Limited. All rights reserved.
PB16‐033117 v0
9
Advertisement
Table of Contents
