EPS Bio Technology EasyMax LTC Long Term Care Manual page 8

Setting the Time, Date and Medical Record - First Time Use
Setting the current time and date on your meter is important if you use the meter memory.
1. Press (Power Button)
and hold the button until
the meter turns on.
4. Repeat step 3 to set the date and
time. The flashing field is the one you
are currently setting.
Note:
1. When the function of
separate by marking them from 001-999.
2. The meter defaults to the medical record function being "
reset this function.
2. Press (Right Button) for
2 seconds to get into the
setting mode.
5. Press
is on, it allows you to keep testing records of multiple users
Page 6
3. The screen display flashes the
last 2-digits of the year. Press
(Left Button) or
to adjust the year and press
(Power Button) to confirm the
setting.
(Left Button) or
on/off the medical record function and press
(Power Button) to confirm the setting.
". Press
(Right Button)
(Right Button) to turn
(Right Button) to