S.bus Basic Setting - FUTABA CGY750 Instruction Manual

S. B S
BUS ASIC ETTING
S.BUS BASIC MAP
MODE
Push
+/– key
DATA
Push
+/– key
(1) S.BUS connection setting:
start display
Use the mode [+] or [-] keys to
navigate through the menu.
Setting ranges common: 1 ~ 16ch, DG1,
DG2, INH
(2) S.BUS setting: Aileron channel [default: 1ch]
Using the data [+] or [-] keys to set the correct channel number.
(3) S.BUS setting: Elevator channel [default: 2ch]
Using the data [+] or [-] keys to set the correct channel number.
(4) S.BUS setting: Throttle channel [default: 3ch]
Using the data [+] or [-] keys to set the correct channel number.
(5) S.BUS setting: Rudder channel [default: 4ch]
Using the data [+] or [-] keys to set the correct channel number.
(6) S.BUS setting: Pitch channel [default: 6ch]
Using the data [+] or [-] keys to set the correct channel number.
(7) Rotor head gain: AIL and ELE gain channel [default: 9ch]
Using the data [+] or [-] keys to set the correct channel number.
(8) S.BUS setting: RUD gain channel [default: 5ch]
Using the data [+] or [-] keys to set the correct channel number.
(9) S.BUS setting: RPM channel [default: 7ch]
Using the data [+] or [-] keys to set the correct channel number.
(10) S.BUS setting: GOV. on/off channel [default: 8ch]
Using the data [+] or [-] keys to set the correct channel number.
(11) S.BUS setting: Condition on change channel [default: DG1]
Using the data [+] or [-] keys to set the correct channel number.
NOTE: DG1/DG2 are the C1/C2 recommended channels for changing Condition Data.
(12) S.BUS data reset
This resets the S.BUS channel assignments back to the defaults. Press the data [+] key and [Exec
??] will be displayed as a confirmation. Press data [+] to confirm the reset back to the default set-
tings.
9
WARNING
Always verify that the S.BUS function as-
signments match your transmitter's function
(in the FUNCTION menu) assignments. If any
changes are made within the transmitter func-
tion assignments, then it will also be necessary
to make the changes within the S.BUS function
assignments.