Charge The Battery - Kyocera DuraTR User Manual

2. Remove the battery.

Lift upward gently.
3. Attach the battery cover. See
CAUTION! Do not handle a damaged or leaking Li-Ion battery as you can be burned.

Charge the Battery

Follow these instructions to charge your phone's battery using either the included AC adapter or via a
USB connection on your computer.
Charge Using the AC Adapter
Fully charge the battery before powering on the phone.
1. Open the Charger/USB port cover at the left side of the phone.
2. Plug the smaller end of the micro-USB cable into the phone's charger/USB port.
3. Plug the other end of the USB cable into the AC adapter.
4. Plug the AC adapter into an electrical outlet.
 The LED indicator light at the top of the Home screen illuminates when charging starts.
5. After charging, disconnect the phone from the charger.

Unplug the AC adapter from the outlet, and remove the USB cable from the phone and the
AC adapter.

Close the cover.
Warning: Be sure all ports and covers are properly sealed to maintain the phone's waterproof capability.
Note: Your phone's battery should have enough charge for your phone to turn on and find a signal, set up
your voicemail, and make a call. You should fully charge your battery as soon as possible.
Note: Please use only an approved charger to charge your phone. Improper handling of the charging port,
as well as the use of an incompatible charger, may cause damage to your device and void the warranty.
Set Up Your Phone
Insert the Battery.
7