In-Call Operations - Kyocera DuraTR User Manual

Select Decline.
 The ringtone or vibration will stop and the call will be sent directly to voicemail.
Reject a Call and Send a Text Message
You can reject an incoming call and automatically send a text message to the caller.
1. When a call arrives, select Send message.
2. Select a message, and press
– or –
Select Write your own..., write a message, and then press Send (center softkey).
 The ringtone or vibration will stop and the text message will be delivered to the caller.

In-Call Operations

While you're on a call, you can access a number of options.
1. Pressing Options (right softkey) during a call displays a list of available in-call features.
2. To select an option, highlight the option and press

Add call: Initiate a conference call (3-way call).

Go to Bluetooth settings: Display the Bluetooth settings (if applicable).

Use Bluetooth device: Switch the call to a Bluetooth device (if applicable).

Disconnect Bluetooth device: Disconnect the Bluetooth device (if applicable).
Go to Home screen: Display the phone's Home screen.


Noise reduction: Improve the quality of the call using the earpiece.
Further options may also be available:
■
Press Mute/Unmute (center softkey) to mute/unmute the microphone.
■
Press Hold (right softkey) to place the current call on hold. This function is not available during a
call in CDMA network.
■
Press the Volume button up or down to adjust the receiver volume.
■
Press to turn the speaker on. Press again to turn it off.
Warning: Because of higher volume levels, do not place the phone near your ear during speakerphone
use.
Phone Calls and Voicemail
.
.
23