Install The Battery; Charge The Battery - Kyocera Hydro Get Started

Get Your Device Ready
Find out what you need to do before you use your
device the first time.

Install the Battery

1. Slide the battery cover release latch to the
unlocked position (
2. Insert your thumb- or fingernail into the slit (
and lift the battery cover (
3. Insert the battery, contacts end first, and gently
press into place (
).
).
).
4. Replace the cover, applying equal pressure
from the top down on both sides and making
sure all the locking tabs of the cover are seated
with no gaps (
5. Slide the battery cover release latch to the
locked position (
)

Charge the Battery

1. Open the cover of the charger/accessory jack.
2. Plug the smaller end of the micro-USB cable
into the device's charger/accessory jack.
3. Plug the other end of the USB cable into the
charger, and then plug the charger into an
electrical outlet.
).
).
Get Started 3