Shooting With Long Exposure Time (Bulb/Live Time) - Olympus E-M10 Mark III Instruction Manual

Hide thumbs Also See for E-M10 Mark III:
Table of Contents

Advertisement

Shooting with long exposure time ( BULB/ LIVE TIME)
Use for photos such as fi reworks or night scenery. In M
mode, rotate the rear dial in the direction shown until
[BULB] or [LIVE TIME] is displayed in the monitor.
Bulb photography
(BULB):
Time photography
(LIVE TIME):
• To display the view through the lens in the monitor during bulb photography, select an
option other than [Off] for [Live Bulb].
• Press the MENU button to choose the display interval for [Live Bulb] or [Live Time]
photography. Select [Off] to disable the display while exposure is in progress.
• To refresh the display while exposure is in progress, tap the monitor or press the shutter
button halfway.
• [BULB] and [LIVE TIME] are not available at some ISO sensitivity settings.
• To reduce blur caused by camera shake, fi x the camera securely to a tripod and use a
remote shutter release controlled via OI.Share (P. 122).
• During shooting, there are limits on the settings for the following functions.
Sequential shooting, self-timer shooting, time lapse shooting, image stabilizer, etc.
The shutter remains open while the shutter button is pressed.
The exposure ends when the shutter button is released. The view
through the lens is not displayed while exposure is in progress.
The exposure begins when the shutter button is pressed all the
way down. To end the exposure, press the shutter button all the
way down again. The view through the lens is displayed while
exposure is in progress.
2
49
EN

Advertisement

Table of Contents
loading

Table of Contents