Shooting Automatically With A Fi Xed Interval (Intrvl. Sh./Time Lapse) - Olympus TG-6 Instruction Manual

Shooting automatically with a fi xed interval ( Intrvl. Sh./Time Lapse)
You can set the camera to shoot automatically with a set time lapse. The shot frames
can also be recorded as into a single movie.
1
Highlight [Intrvl. Sh./Time Lapse] in X Shooting
Menu 2 and press the Q button.
2
Highlight [On] and press the I.
4
3
Adjust the following settings:
Number of Frames 2 to 299 (frames)
Start Waiting Time
Interval Length
Time Lapse Movie
Movie Settings
• The starting and ending times shown in the display are intended as a guide only. The
actual times may vary with shooting conditions.
• Highlight items and press the Q button to select.
4
Press the Q button when settings are complete.
5
The [Off]/[On] options will be displayed once more; confi rm that [On] is
highlighted and press the Q button again.
6
Shoot.
• [Rec View] (P. 94) operates for 0.5 seconds.
• If either of the time before shooting, or shooting interval is set to 1 minute 31 seconds
or longer, the monitor and camera power will turn off after 1 minute. 10 seconds before
shooting, the power will automatically turn on again. When the monitor is off, press the
ON/OFF button to turn it on again.
84 EN
00:00:00 to 24:00:00
(minutes)
00:00:00 to 24:00:00
(minutes)
Off
On
Movie Resolution
Frame Rate
Back
Sets the number of frames to be shot.
Sets waiting time before starting to shoot.
Sets interval between shots after shooting
starts.
Sets recording format of frame sequence.
[Off]: Records each frame as a still picture.
[On]: Records each frame as a still picture
and generates a single movie from the frame
sequence.
[Movie Resolution]: Select a size for time
lapse movies.
[Frame Rate]: Select a frame rate for time
lapse movies.
Shooting Menu 2
1 Intrvl. Sh./Time Lapse Off
Focus BKT Off
2 2
Focus Stacking Settings
Date Stamp Off
Set