Table of Contents
Advertisement
18
www.aeg.com
8.10 Residual heat indicator
When you deactivate the oven, the
display shows the residual heat.
8.11 Fast heat up function
The Fast heat up function decreases the
heat up time.
The Fast heat up is not
available with every oven
function. You can use the
Fast heat-up function with
the oven functions:
Thermaflow®
Do not put food in the oven
when the Fast heat up
function operates.
1. Set an oven function.
2. Press
up function.
If you activate the Fast heat up function,
horizontal bars on the display flash to
show that the function operates.
8.12 Lock and Child Safety
Device
Lock and Child Safety
Device function locks the
hob and oven at the same
time.
Refer to Hob - Daily Use chapter.
8.13 Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.
8.14 Oven automatic switch-
off
For safety reasons the appliance
deactivates automatically after some
time if a heating function operates and
you do not change any settings.
, Pie/Pizza
or Conventional
.
to activate the Fast heat
Temperature
30 °C - 115 °C
120 °C - 195 °C
200 °C - 245 °C
250 °C - maximum
°C
After the Automatic switch-off, press a
sensor field to operate the appliance
again.
The oven automatic switch-
off does not work with the
Duration or End function.
8.15 Inserting the oven
accessories
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
Switch-off time
12.5 h
8.5 h
5.5 h
3.0 h
Hide quick links:
Advertisement
Table of Contents
