TP-Link Archer C20 User Manual page 77

2 ) Click Save.
Note: Log in to the web management page again if the IP address of the router is altered.
3. Survey the SSID to be bridged:
1 ) Go to Wireless
2 ) Click Survey, locate the root router's SSID and click
TP-LINK_2512 as example).
3 ) If the root router is set with a wireless password, you should enter the wireless
password of the root router.
4 ) Click Save.
4. Disable DHCP:
1 ) Go to DHCP, select Disable, and click Save.
Now you can go to
means WDS bridging is successfully built.
> Wireless Settings
Status to check the WDS status. When the
and click Enable WDS Bridging.
Choose (Here we take
WDS status is Run, it
74