TP-Link Archer C20 User Manual page 61

Chapter 4
• Default Gateway
provided by your ISP.
• Connect - Click
• Disconnect
• Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
• Primary IPv6 DNS
by your ISP.
• Secondary IPv6 DNS
provided by your ISP.
• Use the following IPv6 DNS Servers
addresses, select
IPv6 DNS and
Note:
If you get "Address not found error" when you access a web site, it is likely that your DNS servers are set up
improperly. You should contact your ISP to get DNS server addresses.
DHCPv6
• IPv6 Address
• Default Gateway
provided by your ISP.
• Renew - Click
• Release - Click
• Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
• Primary IPv6 DNS
by your ISP.
- Display the default gateway in colon-hexadecimal notation
Connect to connect immediately.
- Click Disconnect to disconnect immediately.
- Enter the DNS IPv6 address in colon-hexadecimal notation provided
- Enter another DNS IPv6 address in colon-hexadecimal notation
Use the following IPv6 DNS Servers
Secondary IPv6 DNS
- The IPv6 address assigned by your ISP dynamically.
- Display the default gateway in colon-hexadecimal notation
Renew to renew the IPv6 parameters from your ISP.
Release to release the IPv6 parameters from your ISP.
- Enter the DNS IPv6 address in colon-hexadecimal notation provided
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server
- If your ISP gives you one or two DNS IPv6
in the corresponding fields.
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server
Automatically, and the
and enter the Primary
Automatically, and the
58