TP-Link Archer C20 User Manual page 63

Chapter 4
PPPoEv6
• PPPoE Session
types:
• Share with PPPoEv4
• Create a new Session
to select this option.
• Username/Password
These fields are case-sensitive.
• Address Mode
• SLAAC - Get the IPv6 address and prefix by router advertisement.
• DHCPv6 - Get the IPv6 address and prefix by DHCPv6.
• IPv6 Address
• Default Gateway
provided by your ISP.
• MTU (in bytes)
Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your
ISP connection.
• Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
• Primary IPv6 DNS
by your ISP.
- The PPP session type for IPv6 connection. There are two
- The PPPoEv6 and PPPoEv4 use the same PPP session.
- The PPPoEv6 and PPPoEv4 use different PPP sessions. It is default
- Enter the username and password provided by your ISP.
- The way to get the IPv6 address and prefix.
- The IPv6 address assigned by your ISP dynamically.
- Display the default gateway in colon-hexadecimal notation
- The normal MTU (Maximum Transmission Unit) value is 1492
- Enter the DNS IPv6 address in colon-hexadecimal notation provided
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server Automatically, and the
60