Handling Miniuim - NTT docomo F-02D STYLE Series Instruction Manual

F-02D_EN_ninshou
Do not touch the adapter cord, desktop
holder or outlet with wet hands.
May cause fire, burns, electric shock.
No wet hands
Only use with the specified power
source and voltage.
When charging FOMA terminal
Do
overseas, use AC Adapter for global use.
If incorrect voltage is used, this may cause fire,
burns or electric shock.
AC adapter : AC100V
DC adapter : 12 or 24V DC (specific for negative
ground vehicle)
AC adapter for global use : Between 100V and
240V AC (Connect to the AC outlet for internal
household use)
If the DC adapter's fuse blows, replace it
only with the specified fuse.
May cause fire, burns, electric shock. For the
Do
specified fuse, see the instructions that come
with the DC adapter.
Wipe off any dust that accumulates on
the power plug.
May cause fire, burns, electric shock.
Do
When you connect the AC adapter to an
outlet, firmly connect to the outlet.
May cause fire, burns, electric shock.
Do
When you disconnect the power plug
from the outlet or cigarette lighter
socket, do not pull the adapter cord
Do
with excessive force. Instead, hold the
adapter to disconnect.
May cause fire, burns, electric shock.
Always remove the power plug from
the outlet or cigarette lighter when not
using the adapter for an extended
Unplug
period.
May cause fire, burns, electric shock.
Immediately remove the power plug
from the outlet or cigarette lighter
socket if water or other fluids get into
Unplug
the adapter.
May cause fire, burns, electric shock.
Always remove the power plug from
the cigarette lighter socket when
cleaning the equipment.
Unplug
May cause fire, burns, electric shock.

Handling miniUIM

CAUTION
Be careful of the cut surface when
removing miniUIM.
May cause injuries.
Do
13