Bluetooth Devices - NTT docomo F-02D STYLE Series Instruction Manual

F-02D_EN_ninshou
miniUIM
・
Do not use excessive force to install/remove miniUIM.
・
Note that DOCOMO assumes no responsibility for
malfunctions occurring as the result of inserting and
using miniUIM with another IC card reader/writer.
・
Always keep UIM ICs clean.
・
Clean UIM with a soft, dry cloth (such as a cloth for
eyeglasses).
・
Maintain a separate record of the data you saved in
miniUIM.
- If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・
To preserve the environment, bring the old miniUIM
to a sales outlet such as docomo Shop.
・
Take care not to scratch, touch accidentally or short
IC.
- May cause data loss or malfunction.
・
Do not drop miniUIM or subject it to shocks.
- May cause malfunction.
・
Do not bend miniUIM or place heavy objects on it.
- May cause malfunction.
・
Do not install miniUIM into FOMA terminal with a
label or sticker put on.
- May cause malfunction.
®
Bluetooth devices
・
This FOMA terminal is equipped with the security
features, that are compliant with Bluetooth standards
for communication via Bluetooth. However,
depending on the settings, there may not be enough
security. Be aware of security risks when using
Bluetooth.
・
DOCOMO assumes no responsibility for any
information which may be leaked during
communication via Bluetooth.
・
You can use headset, handsfree, audio, keyboard,
dial-up connection, data transfer, serial port, image
transfer or health devices with FOMA terminal. An
audio/video remote control may be available with an
audio device (only Bluetooth compatible devices).
18
・
Frequency bands
Frequency bands used by FOMA terminal Bluetooth
function are as below.
a b
2.4FH1
d
a2.4 : Radio equipment that uses the 2400 MHz band.
bFH : The modulation is the FH-SS method.
c1 : The expected interference distance is 10 m or
shorter.
d
: All bandwidths between 2400 MHz
and 2483.5 MHz are used, and the bandwidth used by
mobile object identification devices cannot be
avoided.
Cautions on using Bluetooth devices
In the bandwidth used by this terminal, in addition to
home electric appliances such as a microwave oven and
industrial/scientific/medical devices, in-plant radio
stations used to identify mobile objects used in
production lines of a factory that require a license,
specified low power radio stations, or amateur radio
stations that do not require a license (hereafter "other
radio stations") can be in operation.
1. Before using this terminal, check whether other radio
stations are in operation in your neighborhood.
2. If radio wave interference occurs between the
terminal and "other radio stations", use the terminal
in a different location or "Turn the power OFF" to
avoid the radio wave interference.
3. For details, contact "General Inquiries" on the last
page of this manual.
c