Asus ROG GR8 II User Manual page 35

6. Carefully place the HDD/SSD and bracket assembly into the
drive bay.
7. Connect the HDD/SSD connector cable to the HDD/SSD.
8. Secure the HDD/SSD and bracket assembly to the drive bay
using the bundled three HDD drive bay screws and the one
screw removed earlier.
IMPORTANT! The screws sets may vary in size. Ensure to use the
correct screws.
9. Follow steps 9 and 10 from the Upgrading memory modules
section to replace the side cover.
ROG GR8 II Series
35