Table of Contents
Advertisement
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
In accordance with essential requirements of the European
directive(s).
Class II - The machine is double insulated; Earthing wire is
therefore not necessary.
Read manual before use.
Mandatory use of eye protection.
Wear noise protection.
Wear a dust mask in dusty conditions
5 GENERAL POWER TOOL SAFETY WARNINGS
Attention ! Read all safety warnings and instructions. Failure to heed
warnings and follow instructions may result in electric shock, fire and/or
serious injury.
Keep safety warnings and instructions for future reference.
The term "power tool" in the safety warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
5.1
Working area
Keep working area clean and well lit. Untidy and dark areas can lead to
accidents.
Do not operate power tools in potentially explosive surroundings, for
example, in the presence of inflammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power
tool. Distractions can cause you to lose control of it.
5.2
Electrical safety
Always check that the power supply corresponds to the voltage
on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use adapter plugs with earthed power tools.
Copyright © 2015
FE1-20
P a g e
| 4
EN
www.Ford-tools.com
Advertisement
Table of Contents
