Noise; Service Department; Storage - Ford FE1-20 Instruction Manual

Table of Contents

Advertisement

13

NOISE

Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
a
(Vibration):
w
14

SERVICE DEPARTMENT

Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a
particular connecting cable which is available from our service department.
Replacement of the connecting cable must only be carried out by our service
department (see last page) or by a qualified person (qualified electrician).
15

STORAGE

Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool
and dry place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don't keep it in plastic bags to avoid humidity build-up.
16
WARRANTY
This product is warranted as provided by law for a 12 -month period effective
from the date of purchase by the first user.
This warranty covers all material or production flaws excluding: batteries,
chargers, defective parts subject to normal wear & tear such as bearings,
brushes, cables, and plugs, or accessories such as drills, drill bits, saw
blades, etc. ; damage or defects resulting from maltreatment, accidents or
alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall
under the warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate
use of the tool.
Repairs may only be carried out by an authorised customer service centre for
FORD tools.
You can always obtain more information at the number : 032 2 15 75 75.
Any transportation costs shall always be borne by the customer, unless
agreed otherwise in writing.
At the same time, no claim can be made on the warranty if the damage of
the device is the result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid
permeation, excessive dust penetration, intentional damage (on purpose or
by gross carelessness), inappropriate usage (use for purposes for which the
device is not suitable), incompetent usage (e.g. not following the instructions
Copyright © 2015
FE1-20
25 m/s²
P a g e
| 10
EN
92 dB(A)
103 dB(A)
K = 1.5 m/s²
www.Ford-tools.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fe1-21

Table of Contents