Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ford F181-20A
Summary of Contents for Ford F181-20A
- Page 1 Operation manual and security instructions inside the box. Use safety glasses. Keep this tool away from children. Ford Motor Company trademarks and trade dress used under license to Nine HKG, Ltd. fordmotorcompany.com Made in P.R.C. EU-Importer Jumbo-Markt AG, 8305 Dietlikon, Switzerland...
- Page 2 LINE GEBRAUCHSANWEISUNG MODE D’EMPLOI INSTRUZIONE PER L’USO JAHRE GARANTIE F181-20A (LT60491) AKKU-WINKELSCHLEIFER - MEULEUSE D’ANGLE SANS FIL - SMERIGLIATRICE ANGOLARE CORDLESS DE · FR · IT...
-
Page 3: Table Of Contents
Fitting the auxiliary handle (Fig. 1) ..........14 Assembly the protective guard (Fig. 2 – 3) ......... 14 Replacing the grinding disc (Fig. 4 – 5) ........15 Switching on / off (Fig. 6) ............15 Copyright © 2014 www.Ford-tools.com P a g e... - Page 4 11.2 Lubrication ................. 17 TECHNICAL DATA ..........18 NOISE ..............18 SERVICE DEPARTMENT .......... 19 STORAGE ............... 19 WARRANTY ....ERROR! BOOKMARK NOT DEFINED. ENVIRONMENT ............21 DECLARATION OF CONFORMITY ......22 Copyright © 2014 www.Ford-tools.com P a g e...
-
Page 5: Original Instruction Manual En
Original Instruction Manual CORDLESS ANGLE GRINDER 115MM 18V F181-20A APPLICATION This machine is developed for grinding and roughing of metal and stone. It is not designed for commercial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. -
Page 6: Symbols
Do not expose charger Ambient temperature 40°C and battery pack to max. (only for battery) water Do not incinerate For indoor use only battery pack or charger Before charging, read the Intended for recycling instructions Copyright © 2014 www.Ford-tools.com P a g e... -
Page 7: General Power Tool Safety Warnings
Do not abuse the cord. Never use the cord for carrying, pulling or " unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. Copyright © 2014 www.Ford-tools.com P a g e... -
Page 8: Personal Safety
Do not use the power tool if the switch does not turn it on and off. Any " power tool that cannot be controlled with the switch is dangerous and must be repaired. Copyright © 2014 www.Ford-tools.com P a g e... -
Page 9: Battery Tool Use And Care
Under abusive conditions, liquid may be ejected from the battery; " avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Copyright © 2014 www.Ford-tools.com P a g e... -
Page 10: Service
Damaged accessories will normally break apart during this test time. Copyright © 2014 www.Ford-tools.com P a g e... - Page 11 Further safety instructions for operation Kickback and Related Warnings Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use auxiliary handle, if provided, Copyright © 2014 www.Ford-tools.com P a g e...
- Page 12 Do not use worn down wheels from larger power tools. Wheel intended for larger power tool is not suitable for the higher speed of a smaller tool and may burst. Copyright © 2014 www.Ford-tools.com P a g e | 10...
-
Page 13: Additional Safety Instructions For Batteries And Chargers
In case of eye contact, rinse abundantly with clean water for at least 10 minutes. Consult a physician. Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do not incinerate the battery. Chargers For indoor use only. Copyright © 2014 www.Ford-tools.com P a g e | 11... -
Page 14: Operation
(working followed by recharging) for the item to fully charge. The battery should only be used indoors when charging. The battery pack will become slightly warm to the touch while charging, this is normal and does not indicate a problem. Copyright © 2014 www.Ford-tools.com P a g e | 12... -
Page 15: Charging Indication
(10) in and pull the battery pack off at the same time (See Fig. 7 (A and B)). Removal / insertion of battery (Fig. 8) Copyright © 2014 www.Ford-tools.com P a g e | 13... -
Page 16: Fitting The Auxiliary Handle (Fig. 1)
CAUTION! The machine should be used only with guard. The position of the disc guard can be adjusted to suit the working conditions. The protective guard must be replaced if damaged. WARNING Copyright © 2014 www.Ford-tools.com P a g e | 14... -
Page 17: Replacing The Grinding Disc (Fig. 4 - 5)
Connect the battery pack onto the angle grinder body. To switch on the angle grinder, push the lock-off button (9) to left or right and squeeze the ON/OFF switch trigger (4) Copyright © 2014 www.Ford-tools.com P a g e | 15... -
Page 18: Operaton Modes
Switch off the grinder after use. 10 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS 10.1 Flange arrangements when using a depressed centre or straight grinding wheel 1 Clamping flange 2 Flange nut Copyright © 2014 www.Ford-tools.com P a g e | 16... -
Page 19: Cleaning And Maintenance
If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. 11.2 Lubrication The machine does not require any specific lubrication. Copyright © 2014 www.Ford-tools.com P a g e | 17... -
Page 20: Technical Data
Original Instruction Manual 12 TECHNICAL DATA MODEL NR. F181-20A Rated voltage (direct current) Rotation speed 7000 min Charging time +/-1 hour Battery type 2600mAh Li-Ion Charger rated voltage 230V Charger frequency 50Hz Max. disc diameter: Ø 115mm Drive spindle thread:... -
Page 21: Service Department
Protect it from exposure to direct sunlight. Keep it in the dark, if possible. Don’t keep it in plastic bags to avoid humidity build-up. Copyright © 2014 www.Ford-tools.com P a g e | 19... -
Page 22: Warranty
We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool. Repairs may only be carried out by an authorised customer service centre for FORD tools. Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing. -
Page 23: Environment
Local, state or federal laws may prohibit disposal of Li-ion batteries in ordinary trash. Consult you local waste authority for information regarding available recycling and/or disposal options. Copyright © 2014 www.Ford-tools.com P a g e | 21... -
Page 24: Declaration Of Conformity
18 DECLARATION OF CONFORMITY Jumbo-Markt AG, 8305 Dietlikon, declares that, Product : Cordless Angle grinder Trade mark : Ford Model : F181-20A (LT60491) Batch no.:1407 Is in conformity with the essential requirements and other relevant provisions of: European Directives: Electromagnetic Compatibility: 2004/108/EC...
Need help?
Do you have a question about the F181-20A and is the answer not in the manual?
Questions and answers