NeptuneLabs FSI Viewer JS User Manual page 57

2 FSI Viewer JS
perimeterAngleFadeOutX
Description
Syntax
Default
Context
The angle range in which the hot spot shall be faded in and out.
A value of "0" means that the hot spot will be displayed or hidden immediately
when entering or leaving the perimeterAngleRange. Values greater than 0
extend the perimeterAngleRange by the given degrees in which the hot spot's
opacity changes.
Only applies if a rotation around the x-axis is used.
perimeterZoom
Description
Syntax
Default
Context
An optional parameter specifying from which magnification level on a hot spot
should be displayed. E.g. 2.5 would hide the hot spot as long as the
magnification level is below 2.5. This parameters has no effect if zoom is
disabled by the global "enableZoom" parameter.
perimeterImageWidth
Description
Syntax
Default
Context
Similar to perimeterZoom. While perimeterZoom depends on the magnification
this parameter defines the absolute width of the (zoomed) spin instance to
57
angle range in which the hot spot shall be faded in and
out
float
10
FSI Viewer JS
specifies from which magnification level on a hot spot is
displayed
float
1.0
FSI Viewer JS
defines the absolute width of spin instance for displaying
hot spot
float
1.0
FSI Viewer JS
NeptuneLabs - FSI Viewer