NeptuneLabs FSI Viewer JS User Manual page 52

HotSpot definition mode
<hotspots3d>
<defaults>
</defaults>
<hotspot>
</hotspot>
<hotspot>
</hotspot>
[...]
Hot Spot Parameters:
x, y and z
Description
Syntax
Default
Context
The x, y and z distance in mm on the real object measured from the center of
the object (usually equal to the center of the turn table).
Combined with the required <camera> parameters, the viewer calculates the
rotated and projected position of the hot spot on screen.
NeptuneLabs - FSI Viewer
<normalClass value="hotspotNormal"/>
<hoverClass value="hotspotOver"/>
<activeClass value="hotspotAction"/>
<perimeterAngleFadeOut value="15" />
<text value="Hot Spot A "/>
<x value="11"/>
<y value="223"/>
<z value="-116"/>
<perimeterAngle value="0"/>
<perimeterAngleRange value="60"/>
<text value="Hot Spot B "/>
<x value="11"/>
<y value="223"/>
<z value="-116"/>
<perimeterAngle value="90"/>
<perimeterAngleRange value="30"/>
<perimeterAngleFadeOut value="5" />
x, y, z distance on the real object measured from center
of object
float (in mm)
-
FSI Viewer JS
2 FSI Viewer JS
52