NeptuneLabs FSI Viewer JS User Manual page 206

InitialViewPersistent
Description
Syntax
Default
Context
Version
If this parameter is activated, clicking the "Reset" button will display the image
section defined by the InitialView parameter instead of the entire image. If this
parameter is set to "false", the initial view will be displayed on startup, but
pressing the Reset button will reset the view to the entire image.
InitialAction
Description
Syntax
Default
Context
Specifies an action to execute on startup. The action is repeated until the user
presses a button or key.
While the action is being executed no image details are loaded.
Possible values:
NextScene
PreviousScene
NextSceneSet
PreviousSceneSet
RotateRight
RotateLeft
ZoomIn
ZoomOut
NeptuneLabs - FSI Viewer
Keep the InitialView as default view
Boolean
false
<Options>
2.0.0 or higher
Action on startup
String
—
<Options>
(rotate around the y-axis to the right, 3D only)
(rotate around the y-axis to the left, 3D only)
(rotate around the x-axis to the right 3D only),
(rotate around the x-axis to the left, 3D only)
(rotate around the z-axis to the right, 3D only)
(rotate around the z-axis to the left, 3D only)
(zoom in)
(zoom out)
8 FSI Viewer
206