NeptuneLabs FSI Viewer JS User Manual page 46

The straight distance from the top of the turn table to the ground in mm. (see
illustration below)
targetHeightOffset
Description
Syntax
Default
Context
The height of the camera target spot at the center of the turn table in mm.
If you vertically target the table center the value is 0.0 mm.
(see illustration below)
targetWidthOffset
Description
Syntax
Default
Context
The horizontal offset of the camera target spot at the vertical the center of the
turn table related to the center of the turn table in mm. If you target the
horizontal table center (default) the value is 0.0 mm.
heightAboveTable
Description
Syntax
Default
Context
Alternative parameter if heightCamera and heightTable are unkown. Onyl
applies if both parameters are undefined.
NeptuneLabs - FSI Viewer
height of the camera target spot at the center of the
turntable
float (in mm)
0
FSI Viewer JS
horizontal offset of the camera target spot
float (in mm)
0
FSI Viewer JS
height of the image plane above the table
float (in mm)
500
FSI Viewer JS
2 FSI Viewer JS
46