NeptuneLabs FSI Viewer JS User Manual page 222

you can set this value to "false" to prevent display problems at the maximum
magnification.
TiltModeRelative
Description
Syntax
Default
Context
Version
True: Rotate the image (2D) around the center of the view port depending on
the mouse position and distance to the center. False: Rotate the image (2D)
clockwise moving the mouse right and counterclockwise moving the mouse left.
TileSizeX and TileSizeY
Description
Syntax
Default
Context
Version
Specifies the size of image details tiles. The value can be defined relative to the
viewer size (e.g. "25%") or using absolute pixel values (e.g. "256"). The default
value of 50% means that each image tile is one quarter in size of the entire
viewer. This way a maximum of 9 image tiles is required to display the selected
image section.
Please do not change this value unless you are certain that this is necessary
and you are aware of possible consequences:
Defining smaller image tiles reduces the overall viewer performance
l
and increases the number of requests and thus the imaging server
load.
Defining larger image tiles might lead to increased traffic and
l
decreased download performance as more image data than actually
required for a certain image section will be loaded.
NeptuneLabs - FSI Viewer
Use absolute or relative tilt mode
Boolean
true
<Options>
3.6.0 or higher
Size of image detail tiles
Number in pixel or in percent of the viewer size
50%
<Options>
2.3.0 or higher
8 FSI Viewer
222