NeptuneLabs FSI Viewer JS User Manual page 56

perimeterAngleRange
Description
Syntax
Default
Context
The angle range in which the hot spot shall be visible.
E.g. a perimeterAngle of "90" and a perimeterAngleRange of "40" would display
the hot spot from 70 to 110 degrees (+/- 20°).
Alias: perimeterAngleRangeY
perimeterAngleRangeX
Description
Syntax
Default
Context
The angle range in which the hot spot shall be visible.
Only applies if a rotation around the x-axis is used.
perimeterAngleFadeOut
Description
Syntax
Default
Context
The angle range in which the hot spot shall be faded in and out.
A value of "0" means that the hot spot will be displayed or hidden immediately
when entering or leaving the perimeterAngleRange. Values greater than 0
extend the perimeterAngleRange by the given degrees in which the hot spot's
opacity changes.
Alias: perimeterFadeOutY
NeptuneLabs - FSI Viewer
angle range in which the hot spot shall be visible
float
30
FSI Viewer JS
angle range in which the hot spot shall be visible
float
30
FSI Viewer JS
angle range in which the hot spot shall be faded in and
out
float
10
FSI Viewer JS
2 FSI Viewer JS
56