System Operating Modes; Altimeter Setting; Baro Unit Conversion - Honeywell KAP 140 Installation Manual

System Operating Modes

Functions independent of autopilot status

Altimeter setting

Upon successful completion of preflight test, the baro display will flash.
1. BARO setting - Enter barometric setting using the rotary knobs OR if correct as
displayed, press BARO.
Note: triggering Barometric event (FS default key is B) will synchronize this unit's baro
setting with the Altimeter baro setting.

Baro unit conversion

The barometric pressure display can be toggled between IN HG and HPA as needed by
the pilot.
1. BARO button - Press and hold for two seconds.
8