Approach Mode From Rol Mode - Honeywell KAP 140 Installation Manual

Approach (APR) Mode from ROL Mode (All Angle Intercept)
The autopilot is following the localizer. When the
glideslope signal is at midscale, current Vertical Mode
is automatically disengaged and the glideslope (GS) is
captured
The autopilot will make pitch and bank changes as
necessary to maintain localizer and glideslope.
Note: GS won't be captured if the LOC needle is
deflected more than 3 dots in either left or right
direction.
6. Press AP to disengage the autopilot and cancel APR
mode.
Note: In this installation the Heading Bug is supplying
the LOC reference signal to the autopilot Therefore,
Heading Bug must correspond with published LOC
course.
In the approach (APR) mode, the autopilot intercepts
and tracks VOR/LOC/ILS and GPS courses.
To arm APR mode (with the KAP 140 currently in the
ROL mode):
Maneuver the aircraft to the desired intercept angle
prior to selecting ROL mode.
16