Mercedes-Benz GLE Operator's Manual page 372

Emergency spare wheel
370
Pull connector ? and hose B out of the
X
housing.
Remove the cap from the valve on the col-
X
lapsible spare wheel.
Screw union nut ; of hose B onto the valve.
X
Make sure on/off switch A of the tire infla-
X
tion compressor is set to 0.
Insert connector ? into a socket in your vehi-
X
cle.
Cigarette lighter socket: (
12 V sockets: (
Observe the notes on the cigarette lighter
( page 301). Observe the notes on sockets
Y
( page 301).
Y
Turn the SmartKey to position 1 in the ignition
X
lock ( page 132).
Y
Press on and off switch A on the tire inflation
X
compressor to I.
The tire inflation compressor is switched on.
The tire is inflated. The tire pressure is shown
on pressure gauge =.
Inflate the tire to the specified tire pressure.
X
The specified tire pressure is printed on the
yellow label of the emergency spare wheel.
When the specified tire pressure has been
X
reached, press on and off switch A on the
tire inflation compressor to 0.
The tire inflation compressor is switched off.
Turn the SmartKey to position 0 in the ignition
X
lock.
If the tire pressure is higher than the specified
X
pressure, press pressure release valve but-
ton : until the correct tire pressure has been
reached.
Unscrew union nut ; on hose B from the
X
valve.
Screw the cap onto the valve of the collapsi-
X
ble spare wheel again.
page 301)
Y
page 301)
Y
Stow connector ? and hose B in the lower
X
section of the tire inflation compressor.
Stow the tire inflation compressor in the vehi-
X
cle.