Removing The Button Board - JVC HX-Z10 Service Manual

3.1.15 Removing the button board

(See Fig.32~34)
• Prior to performing the following procedure, remove the switch
/micon board.
(1) Pull out the preset knob, the volume knob and the sound
mode knob.
(2) Remove the two screws V attaching the knob holder. Re-
move the nut from the front panel.
(3) Remove the eleven screws W attaching the button board.
Sound mode knob
Volume knob
Preset knob
Fig.32
V
Knob holder
Fig.33
Nut
Fig.34
(No.MB014)1-17