Choosing A Place For The Printer - Epson Stylis Pro 9860 Setup Manual

Choosing a Place for the Printer / 選擇放置印表機的位置
Instructions for placing the printer
Choose a flat and stable location that can support the printer weight (about 135 kg).
o
Use only an outlet that meets the power requirements of this printer.
o
Operate the printer under the following conditions:
o
Temperature: 10 to 35℃
o
Humidity: 20 to 80% without condensation
o
Even the conditions above are met, you may not print properly if the environmental conditions are
o
not proper for the paper. See the instructions of the paper for more detailed information.
Keep the printer away from drying, direct sunlight, or heat sources to maintain the appropriate
o
humidity.
Leave enough room for easy operation, maintenance, and ventilation.
o
放置印表機的說明
選擇一處能承受印表機重量 (約 135 kg) 的穩定位置。
o
只使用符合這台印表機電源規格的插座。
o
請在下列的環境中操作印表機：
o
溫度：10 至 35℃
溼度：20 至 80% 沒有凝結
即使符合了上述條件，但如果環境條件不適合紙張，還是可能會無法正確列印。詳細的資料，
請查看紙張的操作說明。
避免將印表機放在過於乾燥、陽光直射、或高溫之處以維持適當的溼度。
o 為了方便操作、維修、及通風，請預留足夠的空間。
Spaces around the printer
Leave adequate room (additional 300 mm to dimensions in the table below) for setting up the printer.
印表機周圍的空間
為了安裝印表機，請預留足夠的空間 (下表中的體積再加 300 mm)。
1864 mm
W
1318 mm
D
1218 mm
H
[