Print Head Alignment - Epson Stylis Pro 9860 Setup Manual

Print Head Alignment /

[ [[ [
English / 英文
Before you start using the printer, we recommend to perform the print head alignment. Use a bundled
roll paper (Doubleweight Matte Paper) for it.
1 Make sure that a bundled roll paper is loaded in the printer.
2 Press the button to enter the Menu mode.
button to select HEAD ALIGNMENT, and then press the
3 Press the /
4 Press the / button to select PAPER THICKNESS, and then press the
5 Set the paper type .
1) Press the / button to select SELECT PAPER TYPE, and then press the
2) Press the / button to select Matte Paper, and then press the
3) Press the / button to select Doubleweight Matte, and then press the OK button.
button three times to back to HEAD ALIGNMENT menu.
6 Press the
校正印字頭
If you cannot print properly,
see "Problem Solver" in the User's Guide
to solve the problem.
若無法正確地列印，請參考進階使用說明中的〝解決
問題的方法〞單元來解決問題。
button.
button.
button.
button.
7 Press the / button to select ALIGNMENT, and then press the
8 Press the / button to select MANUAL,and then press the
button to select BI-D [-COLOR, and then press the
9 Press the /
10 Press the OK button to print the adjustment pattern.
11 Check the pattern and select the set number that has the smallest gaps.
12 When BI-D [-COLOR #[ LC appears on the LCD panel, press the
number, and then press the OK button.
13 Set the number for#[ LCto #[ LM, and then press the OK button.
After you set the patterns, press the
[[
button.
button.
button.
/ button to select the
button to return to the READY state.