LED is off when there is no rechargeable battery inside
the camera base; the LED is red when the rechargeable
battery pack is charging; the LED turns off when the
rechargeable battery is fully charged.
The camera can also be powered using 3 AA batteries (not included) installed in the base. If the camera is plugged in with the AC adapter, the batteries will not be used.
`
n
The batteries are intended for short term, portable camera use.
`
Night Light is available only when the camera is paired to the receiver.
conditions.
nightLightSwitch
Press to turn the night light ON or OFF.
Alternatively, press the light button on the receiver to
remotely turn the camera light ON or OFF.
pairingButton
The pairing button is located on the back of the camera