Motocaddy S1 Lite Instruction Manual page 7

Adjusting the Bag Supports
The bag support straps are manufactured from elasticated material to allow your golf bag to be
held tightly in place.
The strap should be adjusted to be reasonably tight around the golf bag:
1. Unclip the elasticated straps from the housing by pulling outwards in the direction shown (fig. 1)
2. Move the bar as required to tighten or loosen the strap fitting. Pulling the bar downwards will
tighten, pushing it upwards will loosen (fig. 2)
3. Ensure that the straps are clipped back into the housing before use (fig. 3)
Using the Parking Brake
The foot brake on the S1 Lite Push Cart is designed to be used as a parking brake (like a hand
brake of a car or foot brake on a pram). When applying the brake, please ensure that the trolley
has completely stopped moving.
WARNING: attempting to apply the brake whilst the trolley is still in motion may cause
damage to the trolley and could invalidate the warranty.
Always ensure that the parking brake has been disengaged before attempting to set off again.
Adjusting the Bag Supports / Using the Parking Brake
Fig 1
Fig 2
Fig 3
Page 7