Appendix; Frequently-Asked Questions; When The Driver Has Been Installed With Usb Type Key Connected To A Personal - YASKAWA NX100 Installation Manual

4 APPENDIX

4.1 Frequently-asked Questions

4.1.1
When the driver has been installed with USB type key connected to a
personal computer
3) Under the state that the USB type key is attached to the personal computer, delete the
item registered as "USB Token" in Device Manager.
4) Uninstall the driver (Sentinel System Driver 5.41.1(32-bit)) with [Add/Remove
Programs].
5) Install the driver with key detached from personal computer. With the procedure
above, the driver can be performed normally.
4.1.2
When the previous version driver (Ver.PD-5.39.2) has been installed after
installing the driver Ver.PD-5.41.1
In this case, problems may occur infrequently. To avoid problems, uninstall the driver
Ver.PD-5.39.2（Sentinel System Driver）by [Add / Remove Programs].
4.1.3
When the software program does not start properly with D-SUB type
There is a possibility that the driver of the hardware lock key is old type or does not exist.
Execute "\SentinelDriver\SSD5411-32bit.EXE" of installation CD-ROM. Refer to
"\SentinelDriver\Manual\us\Readme.pdf" for the installation procedure.
Note 1) Be sure to install the driver under Windows2000/XP environment.
Note 2) When installing the driver under Windows2000/XP environment, be sure to login
on administrator mode in order to add files to system folder and input
information in registry.
HW0482335
31/31