Regular Inspection Instructions - Vmac G300003 Installation, Owners And Service Manual

Regular Inspection Instructions

Read the "Maintenance and Repair Safety" section prior to
performing any work on the system (beginning on Page 38).
Wear appropriate Personal Protective Equipment and follow
all industry standard safety practices.
Do not overfill the system. Overfilling the system with oil can
flood the sight glass window and make the system appear
empty.
Inspecting and Adding Compressor Oil

Ensure the vehicle is parked on level ground and that the compressor
system is depressurized and cool to the touch.

Check the oil level in the sight glass and ensure that it is between the
"MAX" arrow and the "ADD" arrow.

If the level is below the "ADD" arrow:

Remove the fill cap on the tank (above the sight glass).

Using a funnel, pour oil into the fill fitting until the oil level in the sight
glass reaches the "MAX" arrow.

Replace the fill cap and tighten securely.
Oil fill cap
42
Figure 29 – Inspecting the oil
VMAC – Vehicle Mounted Air Compressors
VMAC Knowledge Base: www.kb.vmacair.com
Oil drain
VMAC Technical Support: 1-888-241-2289
Sight glass