Assembling The Defrost Sensor - Danfoss DHP-A Installation Instruction
Outdoor unit
Hide thumbs
Also See for DHP-A:
- Service instructions manual (86 pages) ,
- Installation instructions manual (74 pages) ,
- Installation manual (64 pages)
Advertisement
1 .7
Assembling the defrost sensor
Figure 8: Hook the defroster sensor into place .
18. Slide the mounting for the defroster sensor into the hole on the reverse of the outdoor unit until it hooks into place on
the edge.
19. Secure the defroster sensor at the bottom of the mounting using a cable tie.
The outdoor unit is now mounted and can be adjusted on the site where it should be set up.
6
VMBMF302
Advertisement
