Advertisement
Circumference Measurement with a Label
Press Freeze.
1
Press Caliper Key.
2
Rotate SELECT control to highlight measurement from on screen menu, press SELECT control.
3
Place first caliper, press SET key.
4
Place second caliper, press SET key.
5
To adjust a caliper location- re-activate caliper by pressing the UPDATE key. (green is active)
6
Roll TRACKBALL to adjust ellipse shape, press SET key. (Ellipse can be repositioned by rolling TB)
7
Press SET key to complete measurement and send to Report.
8
Color and Power Doppler
To activate Color press Color Mode control. To exit press again or press 2D. To activate Power Doppler press Power Mode
control.
To adjust...
ROI position
ROI size
Steer
Overall color/power gain
Frequency
PRF (scale)
Spectral Doppler
To activate Spectral Doppler press Doppler Mode key. Roll trackball to position cursor.
To adjust...
Gate size
Overall Doppler gain
Steer
Angle Correct
Frequency
PRF (scale)
Volume
Baseline
Obtaining OB Calculations
Obtain desired image, press Freeze.
1
Press CALIPER key.
2
Rotate SELECT key to highlight desired measurement from on-screen menu, press SELECT key.
3
Place first caliper, press SET key.
4
Place subsequent caliper(s), press SET key. Measurement will be displayed on screen and transferred to Worksheet.
5
...do this
Roll trackball
Press SET Key, roll trackball to adjust, press SET
Press Steer/Angle control (only available on linear txs.)
Rotate to steer
Rotate color control
Toggle soft menu control
Toggle soft menu control
...do this
Toggle soft key menu control
Rotate Doppler mode
Press Steer/Angle control and roll trackball to position cursor.
Press Steer/Angle control and rotate to adjust.
Toggle soft menu control
Toggle soft menu control
Toggle soft menu control
Toggle soft menu control
Advertisement
