7. Attach the second pair of cross bars to the first pair, and to the battery shelf
in the middle of the cabinet using M6x20 screws according to figure 8 below.
Note: It is important that you attach the cross bars in the correct positions, see
figure 8 below.
Note: The cross bars and the battery shelf are fasten with the same screws.
Figure 8 The cross bars attached in the correct positions
8.
Attach the cross bars at the bottom of the cabinet, see figure 9 below.
Figure 9 Attach the cross bars at the bottom of the cabinet.
9. Fasten the rest of the battery shelves from the back side using M6x20 screws.
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
Revision:
A
Date:
2012-04-26
Status:
RELEASED
Page 7