Table of Contents
Advertisement
Figure 17 Align the shelves to the other side wall.
4. Raise the cabinet to a standing position, see figure 18 below.
Figure 18 The Cabinet in a standing position seen from behind.
5. Take out the provided cross bars and assemble them loosely together in pairs
using M6x20 screws and M6 lock nuts, see figure 19 below.
Note: The screw should be threaded through the cross bars with the head
pointing backwards.
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
Revision:
A
Date:
2012-04-26
Status:
RELEASED
Page 15
Advertisement
Table of Contents
