Table of Contents
Advertisement
10. Attach the roof to the side walls using M6x20 screws, see figure 10 below.
11. Tighten all the screws to a torque of 6 Nm.
Figure 10 Attach the roof to the side walls.
12. Remove any insulation from the rear grounding screws.
13. Put on the contact washers and the nuts on the grounding screws.
Figure 11 The rear grounding screws
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
Revision:
A
Date:
2012-04-26
Status:
RELEASED
Page 8
Advertisement
Table of Contents
