Table of Contents
Advertisement
Figure 6 Assembling the cross bars.
6. Attach the first pair of cross bars to the side walls using M6x20, according to
figure 7 below. Start with the top part and fasten the cross loosely using M6x20
screws.
Note: The Indoor Cabinet Medium has crossbars of two different lengths, the longer
crossbars should be attached at bottom.
Note: Do not tighten the screws at this moment.
Figure 7 Attach the cross bars starting from the top
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
Revision:
A
Date:
2012-04-26
Status:
RELEASED
Page 6
Advertisement
Table of Contents
