Table of Contents
Advertisement
3
A
NCHORING
I
NDOOR
The Cabinet must be secured to the floor to prevent it from tipping over and causing
personal injury or damaged equipment. Use the screws and plugs appropriate for
the foundation material.
1. Mark the positions on the floor of the four bolts, see figure 12 below.
Note: The Cabinet can be used as a template.
Figure 12 Hole positions Indoor Cabinet Small (left) and Indoor Cabinet Medium
(right)
2. Drill the holes. Make sure the holes are vertical.
3. Place the Cabinet in position.
4. Insert bolts and washers through the feet of the cabinet but do not tighten them.
5. Level the Cabinet if necessary by putting shims under the feet of the cabinet.
6. Use a torque wrench and a socket to tighten the bolts to the appropriate
torque for the chosen bolt size.
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
I
C
NDOOR
C
M
ABINET
EDIUM TO THE FLOOR
Revision:
Date:
Status:
S
ABINET
MALL AND
A
2012-04-26
RELEASED
Page 9
Advertisement
Table of Contents
