Table of Contents
Advertisement
6
A
NCHORING
FLOOR
The Cabinet must be secured to the floor to prevent it from tipping over and causing
personal injury or damaged equipment. Use the screws and plugs appropriate for
the foundation material.
1. Mark the positions on the floor of the four bolts, see figure 24 below.
Note: The Cabinet can be used as a template.
Figure 24 Hole positions Indoor Cabinet Large
2. Drill the holes. Make sure the holes are vertical.
3. Place the Cabinet in position.
4. Insert bolts and washers through the feet of the cabinet but do not tighten them.
5. Level the Cabinet if necessary by putting shims under the feet of the cabinet.
6. Use a torque wrench and a socket to tighten the bolts to the appropriate torque
for the chosen bolt size.
Document Number:
INS-0038
Prepared by:
Mikael Lindevall
Approved by:
Ulf Krohn
OPEN
I
C
NDOOR
ABINET
Revision:
A
Date:
2012-04-26
Status:
RELEASED
L
ARGE TO THE
Page 19
Advertisement
Table of Contents
