Create Service Egress And Ingress Qos Policies - Alcatel-Lucent 7450 ESS OS Quality Of Service Manual

Overview
Table 35: SAP Ingress Policy Defaults (Continued)
cbs
mbs
high-prio-only
default-fc
default-priority
•
A basic service egress QoS policy must conform to the following:
•
•
•
A basic service ingress QoS policy must conform to the following:
•
•
•
•

Create Service Egress and Ingress QoS Policies

Configuring and applying QoS policies is optional. If no QoS policy is explicitly applied to a SAP
or IP interface, a default QoS policy is applied.
•
•
•
Percent-rate Support
With 9.0R1, percent-rate is supported for pir and cir parameters for both queues and policers.
Page 204
Field
Basic Configurations
Have a unique service egress QoS policy ID.
Have a QoS policy scope of template or exclusive.
Have at least one defined default queue.
Have a unique service ingress QoS policy ID.
Have a QoS policy scope of template or exclusive.
Have at least one default unicast forwarding class queue.
Have at least one multipoint forwarding class queue.
Percent-rate Support on page 204
Service Egress QoS Policy on page 206
Service Ingress QoS Policy on page 208
Default
default
default
default
be
low
7450 ESS OS Quality of Service Guide